ADTRAN AOS Version R10.1.0 Command Reference Manual page 1245

Command Reference Guide Global Configuration Mode Command Set
logging email sender
Use the logging email sender command to specify the sender in an outgoing email message. This name
will appear in the From field of the receiver's inbox. Use the no form of this command to disable this
feature.
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release 6.1 Command was introduced.
Usage Examples
The following example sets a sender for outgoing messages:
(config)#logging email sender myUnit@myNetwork.com
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 1245