ADTRAN AOS Version R10.1.0 Command Reference Manual page 1249

Command Reference Guide
logging forwarding auxiliary-receiver-ip <ip address>
Use the logging forwarding auxiliary-receiver-ip command to specify the IP address of a secondary
syslog server to use when logging events that match the criteria configured using the command
forwarding priority-level on page
configured address.
Syntax Description
<ip address>
Default Values
By default, no secondary syslog servers are configured.
Command History
Release 17.7
Release A4.05
Functional Notes
Configuring a secondary syslog server allows the redundant transmission of messages to two different
servers. This server configuration is optional, and does not function as a failover address; therefore, the
primary server should always be configured using the command
address> on page 1252. Syslog transmits to this auxiliary address independently of normal server
addresses.
Usage Examples
The following example specifies that messages are logged to both a primary syslog server (172.5.67.99)
and an auxiliary syslog server (172.5.69.100):
(config)#logging forwarding receiver-ip 172.5.67.99
(config)#logging forwarding auxiliary-receiver-ip 172.5.69.100
60000CRG0-35E
1251. Use the no form of this command to remove the auxiliary server's
Specifies the IP address of a secondary syslog server to use when logging
messages. IP addresses should be expressed in dotted decimal notation
(for example, 10.10.10.1).
Command was introduced.
Command was introduced in AOS voice products.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
logging forwarding receiver-ip <ip
logging
1249