Table of Contents
Advertisement
Command Reference Guide
policy-class max-sessions <number>
Use the policy-class max-sessions command to specify the maximum number of allowed policy sessions
in the AOS product for both Internet Protocol version 4 (IPv4) and Internet Protocol version 6 (IPv6)
combined. This command sets the maximum session limit for ALL access control policies (ACPs) on the
AOS unit. To set the maximum number of policy sessions only for IPv4, use the command
<ipv4 acp name> max-sessions <number> on page
only for IPv6, use the command
1216. Use the no form of this command to return to the default value.
Syntax Description
<number>
Default Values
By default, the maximum IPv4 and IPv6 ACP sessions allowed are based on the amount of RAM in the
AOS unit. The following table outlines the default values based on RAM:
Command History
Release 18.1
Usage Examples
The following example sets the maximum number of ACP sessions allowed in the AOS unit (for both IPv4
and IPv6 ACP sessions) to 250000:
(config)#policy-class max-sessions 250000
60000CRG0-35E
1061. To set the maximum number of policy sessions
ipv6 policy-class <ipv6 acp name> max-sessions <number> on page
Specifies the number of allowed ACP sessions. Valid range is 1 to a value
based on the amount of RAM in the AOS unit (refer to Default Values
below).
RAM Amount
64 MB
128 MB
256 MB
512 MB
768 MB
1 GB
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
Default Max Sessions
10000
30000
80000
200000
300000
450000
ip policy-class
1282
Advertisement
Table of Contents
