ADTRAN AOS Version R10.1.0 Command Reference Manual page 1238

Command Reference Guide
logging email address-list <email address> ; <email address>
Use the logging email address-list command to specify one or more email addresses that will receive
notification when an event matching the criteria configured using the logging email priority-level
command is logged by AOS. Refer to
the no form of this command to remove a listed address.
Syntax Description
<email address>
Default Values
By default, there are no configured logging email addresses.
Command History
Release 1.1
Usage Examples
The following example specifies three email addresses to use when sending logged messages:
(config)#logging email address-list
admin@adtranemail.com;ntwk@adtranemail.com;support@adtranemail.com
60000CRG0-35E
logging email priority-level on page 1243
Specifies the complete email address to use when sending logged
messages. (This field allows up to 256 characters.)
Enter as many email addresses as desired, placing a semi-colon (;)
between addresses.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
for more information. Use
1238