ADTRAN AOS Version R10.1.0 Command Reference Manual page 1246

Command Reference Guide
logging email smdr address-list <email address> ; <email address>
Use the logging email smdr address-list command to specify one or more email addresses that will
receive notification when the station messaging detail record (SMDR) log had reached 80 percent of its
total capacity. Use the no form of this command to remove a listed address.
Syntax Description
<email address>
Default Values
By default, there are no configured logging email addresses.
Command History
Release A5.01
Usage Examples
The following example specifies three email addresses to use when sending logged SMDR messages:
(config)#logging email smdr address-list
admin@adtranemail.com;ntwk@adtranemail.com;support@adtranemail.com
60000CRG0-35E
Specifies the complete email address to use when sending logged SMDR
messages. (This field allows up to 256 characters.)
Enter as many email addresses as desired, placing a semi-colon (;)
between addresses.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1246