Table of Contents
Advertisement
Command Reference Guide
ntp master
Use the ntp master command to globally set the system as an authoritative Network Time Protocol (NTP)
server. Variations of this command include:
ntp master
ntp master <value>
Syntax Description
<value>
Default Values
By default, the NTP server is not enabled.
Command History
Release 17.2
Usage Examples
The following example enables the master NTP server:
(config)#ntp master
60000CRG0-35E
Optional. Specify the stratum number. The valid range is 1 to 15. We
recommend not setting the stratum higher than 2.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1273
Advertisement
Table of Contents
Need help?
Do you have a question about the AOS Version R10.1.0 and is the answer not in the manual?
Questions and answers