Table of Contents
Advertisement
Command Reference Guide
portal-list <name> <portal1 portal2 portal3...>
Use the portal-list command to create a portal list to associate with a local user name. Use the command
username <username> portal-list <name> password <password> on page 1374
to an previously configured user name. Use the no form of this command to remove the portal list.
Entering this command with the same name, but a different portal list will overwrite the
original portal list.
Syntax Description
<name>
<portal>
console
ftp
http-admin
ssh
telnet
Default Values
By default, no portal lists are defined.
Command History
Release 17.1
Functional Notes
The same portal list can be assigned to multiple user names. Once the list is assigned to the user name,
that user name can only authenticate the portals in the list. If a list is not assigned to a user name, that user
name can be used with any portal that is set for local login.
Usage Examples
The following example assigns the console, telnet, and ssh portals the portal list engineers:
(config)#portal-list engineers console telnet ssh
60000CRG0-35E
Specifies the name of the portal list (maximum of 80 characters).
Specifies the portals assigned to this portal list. The list can contain any
combination of the portals listed below:
Allows the list holder to access the unit via the console.
Allows the list holder to access the unit via File Transfer Protocol (FTP).
Allows the list holder to view the configuration and statistics via Hypertext
Transfer Protocol (HTTP).
Allows the list holder to access the unit via secure shell (SSH).
Allows the list holder to access the unit via Telnet.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
to assign this portal list
1283
Advertisement
Table of Contents
