Command Reference Guide
mail-client <agent name>
Use the mail-client command to create a general-purpose mail agent and enter the Mail Agent
Configuration mode. Use the no form of this command to delete the mail agent. Refer to the
Command Set on page 3201
Syntax Description
<agent name>
Default Values
By default, no mail agents exist.
Command History
Release 17.2
Usage Examples
The following example creates a mail agent called myagent and enters the Mail Agent Configuration
mode:
(config)#mail-client myagent
(config-mail-client-myagent)#
60000CRG0-35E
for more information.
Specifies the name of the created mail agent.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
Mail Agent
1259