ADTRAN AOS Version R10.1.0 Command Reference Manual page 1289

Command Reference Guide
port-channel load-balance
Use the port-channel load-balance command to configure port aggregation load distribution. Use the no
form of this command to reset distribution to its default setting. Variations of this command include:
port-channel load-balance dst-mac
port-channel load-balance src-mac
Syntax Description
dst-mac
src-mac
Default Values
By default, load balance is set to src-mac.
Command History
Release 5.1
Functional Notes
During port aggregation, the port channel interface must determine on which physical port to transmit
packets. With the source-address configuration, the source MAC address of the received packets is used
to determine this allocation. Packets coming from a specific host always use the same physical port.
Likewise, when the destination address configuration is used, packets are forwarded based on the MAC
address of the destination. Packets destined for a specific host always use the same physical port.
Usage Examples
The following example sets the load distribution to use the destination MAC address:
(config)#port-channel load-balance dst-mac
60000CRG0-35E
Specifies the destination medium access control (MAC) address.
Specifies the source MAC address.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1289