Table of Contents
Advertisement
Command Reference Guide
logging forwarding priority-level
Use the logging forwarding priority-level command to set the threshold for events sent to the configured
syslog server specified using the logging forwarding receiver-ip command. All events with the specified
priority or higher will be sent to all configured syslog servers. Refer to
1243
for more information. Use the no form of this command to return to the default priority. Variations of
this command include:
logging forwarding priority-level debug
logging forwarding priority-level error
logging forwarding priority-level fatal
logging forwarding priority-level info
logging forwarding priority-level notice
logging forwarding priority-level smdr
logging forwarding priority-level warning
Syntax Description
Sets the minimum priority threshold for sending messages to the syslog server specified using the logging
forwarding receiver-ip command. The following priorities are available (ranking from lowest to highest):
debug
error
fatal
info
notice
smdr
warning
Default Values
By default, the logging forwarding priority-level is set to warning.
Command History
Release 1.1
Release 12.1
Release R10.1.0
Usage Examples
The following example sends all messages with warning level or greater to the syslog server listed using
the logging forwarding receiver-ip command:
(config)#logging forwarding priority-level warning
60000CRG0-35E
Logs subsystem debugging events.
Logs events with error and fatal priorities.
Logs only events with a fatal priority.
Logs all events.
Logs events with notice, warning, error, and fatal priorities.
Logs events with smdr priorities.
Logs events with warning, error, and fatal priorities.
Command was introduced.
Command was expanded to include the smdr parameter.
Command was expanded to include the debug keyword.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
logging email priority-level on page
1251
Advertisement
Table of Contents
