ADTRAN AOS Version R10.1.0 Command Reference Manual page 1294

Command Reference Guide
qos cos-map <cos queue id> <cos value>
Use the qos cos-map command to associate class of service (CoS) values with each queue. Use the no
form of this command to return to the default setting.
Syntax Description
<cos queue id>
<cos value>
Default Values
By default, CoS 0 and 1 are mapped to queue 1; CoS 2 and 3 are mapped to queue 2; CoS 4 and 5 are
mapped to queue 3; CoS 6 and 7 are mapped to queue 4.
Command History
Release 5.1
Usage Examples
The following example maps CoS values 4 and 5 to queue 1:
(config)#qos cos-map 1 4 5
60000CRG0-35E
Specifies the queue number that you are assigning CoS value(s).
Associates listed CoS values with a particular priority queue. Multiple CoS
values can be applied to a specified queue. Valid range is 0 to 7.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1294