ADTRAN AOS Version R10.1.0 Command Reference Manual page 1227

Command Reference Guide
isdn-group <number>
Use the isdn-group command to enter the ISDN Group Configuration mode command set. Use the no
form of this command to disable this feature. Refer to the section
page 3375 for more information on the commands available for each group.
Syntax Description
<number>
Default Values
No default values are necessary for this command.
Command History
Release 11.1
Functional Notes
An ISDN group allows the user to specify the maximum and minimum number of B-channels that can be
used for a specific type of call. It is a logical group of B-channels from one or more ISDN interfaces. The
interfaces can be of different types (e.g., primary rate interface (PRI) and basic rate interface (BRI)). An
ISDN interface can be a member of multiple ISDN groups that makes it possible to share its B-channels
between different types of calls.
Usage Examples
The following example uses the isdn-group command to enter the ISDN Group Configuration mode for
ISDN group 1:
(config)#isdn-group 1
(config-isdn-group 1)#
60000CRG0-35E
Specifies the integrated services digital network (ISDN) group. Range is 1 to
255.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
Voice ISDN Group Command Set on
1227