ADTRAN AOS Version R10.1.0 Command Reference Manual page 1233

Command Reference Guide
lldp
Use the lldp command to configure global settings that control the way Link Layer Discovery Protocol
(LLDP) functions. Use the no form of this command to return to the default setting. Variations of this
command include:
lldp med-fast-start-interval <value>
lldp minimum-transmit-interval <value>
lldp reinitialization-delay <value>
lldp system-capabilities exclude telephone
lldp transmit-interval <value>
lldp ttl-multiplier <value>
Syntax Description
med-fast-start-interval
minimum-transmit-interval Defines the minimum amount of time between transmission of LLDP frames
reinitialization-delay
system-capabilities
exclude telephone
transmit-interval
ttl-multiplier
<value>
Default Values
By default, med-fast-start-interval is 4 seconds; minimum-transmit-interval is 2 seconds;
reinitialization-delay is 2 seconds; transmit-interval is 30 seconds; and ttl-multiplier is 4.
Command History
Release 8.1
Release 17.2
Release A5.01
60000CRG0-35E
Specifies the fast start transmit interval (in seconds) that LLDP-Media
Endpoint Discovery (LLDP-MED) time length values (TLVs) are sent once
every second, allowing rapid automatic configuration of LLDP-MED capable
endpoints at startup. Range is 1 to 10 seconds. Default value is 4 seconds.
in seconds. Range is 1 to 8192 seconds.
Defines the minimum amount of time to delay after LLDP is enabled on a
port before allowing transmission of additional LLDP frames on that port
in seconds. Range is 1 to 10 seconds.
Configures local system capabilities.
Excludes telephone flag in the system capabilities TLV. Enabling this
command prevents the AOS unit from advertising the telephone system
capabilities in both the system capabilities and enabled capabilities portions
of the LLDP packet.
Defines the delay between LLDP frame transmission attempts during
normal operation in seconds. Range is 5 to 32768 seconds.
Defines the time to live (TTL) multiplier to be applied to the transmit interval
to compute the time to live for data sent in an LLDP frame. Range is 2 to 10.
Specifies the interval, delay, or multiplier.
Command was introduced.
Command was expanded to include the med-fast-start-interval parameter.
Command was expanded to include the system-capabilities and exclude
telephone parameters.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1233