ADTRAN AOS Version R10.1.0 Command Reference Manual page 1243

Command Reference Guide
logging email priority-level
Use the logging email priority-level command to set the threshold for events sent to the addresses
specified using the logging email address-list command. All events with the specified priority or higher
will be sent to all addresses in the list. The logging email on command must be enabled. Refer to
email address-list <email address> ; <email address> on page 1238
for related information. Use the no form of this command to return to the default priority. Variations of this
command include:
logging email priority-level error
logging email priority-level fatal
logging email priority-level info
logging email priority-level notice
logging email priority-level warning
Syntax Description
Sets the minimum priority threshold for sending messages to email addresses specified using the logging
email address-list command. The following priorities are available (ranking from lowest to highest):
error
fatal
info
notice
warning
Default Values
By default, the logging email priority-level is set to warning.
Command History
Release 1.1
Usage Examples
The following example sends all messages with warning level or greater to the email addresses listed
using the logging email address-list command:
(config)#logging email priority-level warning
60000CRG0-35E
Logs events with error and fatal priorities.
Logs only events with a fatal priority.
Logs all events.
Logs events with notice, warning, error, and fatal priorities.
Logs events with warning, error, and fatal priorities.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
and logging email on on page 1242
logging
1243