Table of Contents
Advertisement
Command Reference Guide
logging email exception-report address-list <email address> ;
<email address>
Use the logging email exception-report address-list command to specify one or more email addresses to
receive an exception report for use in troubleshooting. Use the no form of this command to remove a listed
address.
Syntax Description
<email address>
Default Values
By default, there are no configured logging email addresses.
Command History
Release 11.1
Functional Notes
When AOS experiences an exception, it will generate a file with detailed information that ADTRAN's
Technical Support can use to diagnose the problem. This command allows the unit to email the exception
report to a list of addresses upon rebooting after the exception. This command should be used in
conjunction with the other logging email commands. Refer to
<email address> on page 1238
logging email sender on page
information.
Usage Examples
The following example will enable exception report forwarding to john.doe@company.com using the
1.1.1.1 SMTP email server:
(config)#logging email on
(config)#logging email receiver-ip 1.1.1.1
(config)#logging email exception-report address-list john.doe@company.com
60000CRG0-35E
Specifies the complete email address to use when sending exception
reports. (This field allows up to 256 characters.)
Enter as many email addresses as desired, placing a semi-colon (;)
between addresses.
Command was introduced.
,
logging email on on page
1245, and
logging email source-interface <interface> on page 1247
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
logging email address-list <email address> ;
1242,
logging email priority-level on page
1243,
for more
1239
Advertisement
Table of Contents
