ADTRAN AOS Version R10.1.0 Command Reference Manual page 1269

Command Reference Guide Global Configuration Mode Command Set
Usage Examples
The following example sets Ethernet 0/1 as the destination interface and adds Ethernet 0/2, Ethernet 0/3,
and Ethernet 0/5 as source ports:
(config)#monitor session 1 destination interface eth 0/1
(config)#monitor session 1 source interface eth 0/2-3, eth 0/5
The following example sets Gigabit-Switchport 0/1 as the destination interface and removes the VLAN tag:
(config)#monitor session 1 destination interface gigabit-switchport 0/1 no-tag
The following example sets Switchport 0/1 as the source interface and monitors both transmitted and
received traffic:
(config)#monitor session 1 source interface switchport 0/1 both
The following example sets Gigabit-Switchport 0/1, and Switchport 0/2 through Switchport 0/12 as source
interfaces and monitors only received traffic:
(config)#monitor session 1 source interface gigabit 0/1, eth 0/2-12 rx
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 1269