ADTRAN AOS Version R10.1.0 Command Reference Manual page 1280

Command Reference Guide Global Configuration Mode Command Set
ntp update-rtc
Use the ntp update-rtc command to specify periodically updating the clock in real time. Use the no form
of this command to return to the default setting.
Syntax Description
No subcommands.
Default Values
By default, the Network Time Protocol (NTP) is disabled.
Command History
Release 17.2 Command was introduced.
Usage Examples
The following example sets the clock to periodically update the timing:
(config)#ntp update-rtc
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 1280