Command Reference Guide
logging forwarding receiver-ip <ip address>
Use the logging forwarding receiver-ip command to specify the IP address of the syslog server to use
when logging events that match the criteria configured using the logging forwarding priority-level
command. Enter multiple logging forwarding receiver-ip commands to develop a list of syslog servers to
use. Refer to
logging forwarding priority-level on page 1251
this command to remove a configured address.
Syntax Description
<ip address>
Default Values
By default, there are no configured syslog server addresses.
Command History
Release 1.1
Usage Examples
The following example specifies a syslog server (with address 172.5.67.99) to use when logging
messages:
(config)#logging forwarding receiver-ip 172.5.67.99
60000CRG0-35E
Specifies the IP address of the syslog server to use when logging
messages. IP addresses should be expressed in dotted decimal notation
(for example, 10.10.10.1).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
for related information. Use the no form of
1252