Table of Contents
Advertisement
Command Reference Guide
network-specific
plan <indicator>
subscriber
type <number>
unknown
<pattern>
Default Values
By default, the following number template for domestic emergency calls (911) is the only template
preconfigured in AOS:
isdn-number-template 0 prefix " " subscriber 911
Command History
A4.05
60000CRG0-35E
Specifies using network-specific (bits 011) in the TON octet.
Network-Specific is used for calls that require special access to a private
network, which requires the use of a prefix that should be stripped once
access to the network has been gained. Network-specific calls have the
dialing prefix removed. For example, a call to a private network with the 700
consists of 700-N$, where 700 is the dialing prefix and N$ represents the
digits necessary for routing the call at the destination. When the Called
Party IE is created for this call, the prefix is stripped and the N$ is placed in
the Number Digits field.
Specifies the numbering plan indicator (NPI) to use in combination with the
TON and associate it with a number pattern. Valid range is 0 to 15.
Specifies using subscriber (bits 100) in the TON octet. Subscriber is used
for local calls (not long distance). Subscriber calls, by default, have the area
code removed. For example, a subscriber call to 916-555-1212 would have
the prefix 916 stripped and 555-1212 in the number digits field. For areas
with mandatory ten-digit dialing, a blank prefix should be entered to ensure
that all ten digits are passed to the number digits field.
Specifies the TON to use in combination with the NPI and associate it with a
number pattern. Valid range is 0 to 7.
Specifies using unknown (bits 000) in the TON octet. Unknown is used
when the number type is not known. Unknown numbers are assumed to
have no prefix, and the entire dialed number is presented in the number
digits field.
Specifies a pattern for this template.
Valid characters:
0-9
Match exact digit only.
X
Match any single digit 0 through 9.
N
Match any single digit 2 through 9.
M
Match any single digit 1 through 8.
[ ]
Match any digit in the list. For example: [1,4,6] matches 1, 4, and 6
only. [1-3, 5] matches 1, 2, 3, and 5.
Command was expanded to include the plan <indicator> type <number>
<pattern> parameter.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1229
Advertisement
Table of Contents
