ADTRAN AOS Version R10.1.0 Command Reference Manual page 1287

Command Reference Guide
port-auth supplicant
Use the port-auth supplicant command to enable the port-authentication supplicant mode feature and to
enter the Port-Authentication Supplicant Configuration mode. Use the no form of this command to remove
the supplicant mode parameters. Variations of this command include:
port-auth supplicant
port-auth supplicant username <username> password <password>
Syntax Description
supplicant
username <username>
password <password>
Default Values
By default, port authentication and port authentication supplicant mode is disabled.
Command History
Release 10.1
Functional Notes
The supplicant user name and password can be stored in the port and set in the session if it exists. This
allows for the user name and password to be set before the supplicant functionality is enabled.
Usage Examples
The following example sets the user name of admin and the password of password for supplicant mode
authentication on the eth 0/1 interface:
(config)#interface eth 0/1
(config-eth-0/1)#port-auth supplicant username admin password password
60000CRG0-35E
Specifies that port authentication is in supplicant mode.
Specifies the user name used for supplicant authentication.
Specifies the password used for supplicant authentication.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1287