ADTRAN AOS Version R10.1.0 Command Reference Manual page 1339

Command Reference Guide
snmp-server view <name> <value>
Use the snmp-server view command to create or modify a Simple Network Management Protocol
(SNMP) view entry. Use the no form of this command to remove an entry. Variations of this command
include:
snmp-server view <name> <value> excluded
snmp-server view <name> <value> included
Syntax Description
<name>
<value>
excluded
included
Default Values
No default values are necessary for this command.
Command History
Release 9.1
Usage Examples
The snmp-server view command can include or exclude a group of OIDs. The following example shows
how to create a view (named blockInterfaces) to exclude the OID subtree family 1.3.3.1.2.1.2:
(config)#snmp-server view blockInterfaces 1.3.3.1.2.1.2.* excluded
The following example shows how to create a view (named block) to include a specific OID:
(config)#snmp-server view block 1.3.3.1.2.1.2. included
60000CRG0-35E
Specifies a label for the view record being created. The name is a record
reference.
Specifies the object identifier (OID) to include or exclude from the view. To
identify the subtree, specify a string using numbers, such as 1.4.2.6.8.
Replace a single subidentifier with the asterisk (*) to specify a subtree
family.
Specifies a view to be excluded.
Specifies a view to be included.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1339