ADTRAN AOS Version R10.1.0 Command Reference Manual page 1300

Command Reference Guide
radius-server
Use the radius-server command to configure several remote authentication dial-in user service (RADIUS)
parameters for all RADIUS servers on the network. Most of these global settings can be overridden on a
per-server basis (using the command
to return to the default setting. Variations of this command include the following:
radius-server challenge-noecho
radius-server deadtime <value>
radius-server enable-username <name>
radius-server key <key>
radius-server retry <number>
radius-server timeout <value>
Syntax Description
challenge-noecho
deadtime <value>
enable-username <name>
key <key>
retry <number>
timeout <value>
Default Values
challenge-noecho
deadtime
enable-username
key
retry
timeout
60000CRG0-35E
radius-server host on page
Specifies that when users enter text in response to challenge questions the
entered text does not appear on the screen.
Specifies the time to wait (in minutes) before attempting to reconnect to a
RADIUS server that has timed out. Range is 0 to 1440 minutes. Changing
this parameter changes the time to wait for all configured RADIUS servers.
Specifies a user name to be used for authentication to enter the Enable
mode. This user name is the name sent for AAA Enable mode access
requests. Changing this parameter changes the user name for all
configured RADIUS servers.
Specifies the encryption key shared by all RADIUS servers. This is a global
setting; however, it can be overridden on a per-server basis.
Specifies the number of connection attempts to a RADIUS server. Attempt
range is 0 to 10. This is a global setting; however, it can be overridden on a
per-server basis.
Specifies the amount of time (in seconds) that RADIUS servers have to
respond to a request. Time range is 1 to 1000 seconds. This is a global
setting; however, it can be overridden on a per-server basis.
Echo is disabled and users do not see on-screen what they enter.
0 minutes
$enab15$
No default
0 attempts
5 seconds
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1302). Use the no form of this command
1300