ADTRAN AOS Version R10.1.0 Command Reference Manual page 1348

Command Reference Guide
spanning-tree max-age <value>
Use the spanning-tree max-age command to specify the interval (in seconds) the spanning tree will wait
to receive bridge protocol data units (BPDUs) from the root bridge before assuming the network has
changed (thus re-evaluating the spanning-tree topology). Use the no form of this command to return to the
default interval.
Syntax Description
<value>
Default Values
By default, the wait interval is set at 20 seconds.
Command History
Release 5.1
Usage Examples
The following example configures a wait interval of 35 seconds:
(config)#spanning-tree max-age 35
60000CRG0-35E
Specifies the wait interval (in seconds) between received BPDUs (from the
root bridge). Range is 6 to 40 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1348