ADTRAN AOS Version R10.1.0 Command Reference Manual page 1347

Command Reference Guide
spanning-tree hello-time <value>
Use the spanning-tree hello-time command to specify the delay interval (in seconds) between hello
bridge protocol data units (BPDUs). To return to the default interval, use the no form of this command.
Syntax Description
<value>
Default Values
By default, the delay is set to 2 seconds.
Command History
Release 5.1
Usage Examples
The following example configures a spanning-tree hello-time interval of 10000 seconds:
(config)#spanning-tree hello-time 10000
60000CRG0-35E
Specifies the delay interval (in seconds) between hello BPDUs. Range is
0 to 1000000 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1347