Table of Contents
Advertisement
Command Reference Guide
Global Configuration Mode Command Set
spanning-tree edgeport bpdufilter default
Use the spanning-tree edgeport bpdufilter default command to enable the bridge protocol data unit
(BPDU) filter on all ports by default. Use the no form of this command to disable the setting.
Syntax Description
No subcommands.
Default Values
By default, spanning-tree edgeport bpdufilter default is disabled.
Command History
Release 5.1
Command was introduced.
Functional Notes
The BPDU filter blocks any BPDUs from being transmitted and received on an interface. This can be
overridden on an individual port.
Usage Examples
The following example enables the bpdufilter on all ports by default:
(config)#spanning-tree edgeport bpdufilter default
To disable the BPDU filter on a specific interface, issue the appropriate commands for the given interface
using the following commands as an example:
(config)#interface ethernet 0/1
(config-eth 0/1)#spanning-tree edgeport bpdufilter disable
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
1343
Advertisement
Table of Contents
