ADTRAN AOS Version R10.1.0 Command Reference Manual page 1346

Command Reference Guide
spanning-tree forward-time <value>
Use the spanning-tree forward-time command to specify the delay interval (in seconds) when forwarding
spanning-tree packets. Use the no form of this command to return to the default interval.
Syntax Description
<value>
Default Values
By default, the forwarding delay is set to 15 seconds.
Command History
Release 5.1
Usage Examples
The following example sets the forwarding time to 18 seconds:
(config)#spanning-tree forward-time 18
60000CRG0-35E
Specifies the forwarding delay interval in seconds. Range is 4 to
30 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1346