ADTRAN AOS Version R10.1.0 Command Reference Manual page 1331

Command Reference Guide
snmp-server inform
Use the snmp-server inform command to set the number of retry attempts for a response and set the
amount of time to wait for a response before allowing a new request. Use the no form of this command to
return to the default setting. Variations of this command include the following:
snmp-server inform retries <number>
snmp-server inform timeout <value>
Syntax Description
retries <number>
timeout <value>
Default Values
By default, the retry count is set to 3 and the timeout is set to 5 seconds.
Command History
Release 13.1
Usage Examples
The following example sets the retry count to 10:
(config)#snmp-server inform retries 10
60000CRG0-35E
Specifies number of retries for a response. The range is from 1 to 100.
Specifies time (in seconds) to wait for a response. The range is from 1 to
1000 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1331