ADTRAN AOS Version R10.1.0 Command Reference Manual page 1321

Command Reference Guide
snmp-server contact
Use the snmp-server contact command to specify Simple Network Management Protocol (SNMP) server
contact information. Use the no form of this command to remove a configured contact. Variations of this
command include:
snmp-server contact email <address>
snmp-server contact pager <number>
snmp-server contact phone <number>
snmp-server contact "<string>"
Syntax Description
email <address>
pager <number>
phone <number>
"<string>"
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Usage Examples
The following example specifies 6536999 for the pager number:
(config)#snmp-server contact pager 6536999
60000CRG0-35E
Specifies email address for the SNMP server contact.
Specifies pager number for the SNMP server contact.
Specifies phone number for the SNMP server contact.
Populates the sysContact string using an alphanumeric string enclosed in
quotation marks (up to 32 characters in length).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1321