Table of Contents
Advertisement
Command Reference Guide
<day>
relative start-after <delay>
Default Values
By default, no schedules exist.
Functional Notes
Periodic schedules can be expressed in the format <day> <time> to <day> <time> (for example, periodic
monday 08:15 to wednesday 17:15), or up to 7 days can be entered (for example, periodic tuesday
wednesday thursday 08:15 to 17:15).
Command History
Release 14.1
Release 15.1
Release 16.1
Usage Examples
The following example creates a schedule Closed and enters the Schedule Configuration mode:
(config)#schedule Closed
(config-schedule-Closed)#
The following example sets the start time in the schedule named Closed to 8:15 a.m. on February 2, 2007,
and sets the end time to 10:15 a.m. on April 2, 2007:
(config-schedule-Closed)#absolute start 08:15 2 february 2007 end 10:15 2 april 2007
The following example sets the recurring start and end day and time in the schedule named Closed to
Saturday from 8:15 a.m. to 5:15 p.m.:
(config-schedule-Closed)#periodic saturday 08:15 to 17:15
The following example sets the execution delay for the schedule named Closed to 30 seconds:
(config-schedule-Closed)#relative start-after 30
The following example sets the duration for the schedule named Closed to 30 minutes at 1:00 p.m. every
day of the week:
(config-schedule-Closed)#periodic daily 13:00 for 00:30
60000CRG0-35E
The day of the week can be spelled out or abbreviated.
Specifies the time delay before the schedule becomes active. Valid range is
1 to 65535 seconds.
Command was introduced.
Command was expanded.
Command was expanded to include the for parameter.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1314
Advertisement
Table of Contents
