ADTRAN AOS Version R10.1.0 Command Reference Manual page 1349

Command Reference Guide
spanning-tree mode
Use the spanning-tree mode command to choose a spanning tree mode of operation. Use the no form of
this command to return to the default setting. Variations of this command include:
spanning-tree mode rstp
spanning-tree mode stp
Syntax Description
rstp
stp
Default Values
By default, spanning-tree mode is set to rstp.
Command History
Release 5.1
Usage Examples
The following example sets the spanning-tree mode to rstp:
(config)#spanning-tree mode rstp
60000CRG0-35E
Enables Rapid Spanning Tree Protocol (RSTP).
Enables spanning-tree protocol.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1349