Command Reference Guide
snmp-server engineID remote <ip address> <string>
Use the snmp-server engineID remote command to identify a remote Simple Network Management
Protocol (SNMP) entity's engine ID. The remote engine ID is necessary before SNMP version 3 (v3)
inform notifications can be acknowledged. For further information, refer to the command
on page
1336. Use the no form of this command to remove the remote SNMP entity's engine ID.
Syntax Description
<ip address>
<string>
Default Values
By default, there are no remote engine IDs identified.
Command History
Release 14.1
Usage Examples
The following example identifies a remote SNMP device with an IP address of 10.10.12.2 and an engine ID
of 80000298000000A0C8000001:
(config)#snmp-server engineID remote 10.10.12.2 80000298000000A0C8000001
60000CRG0-35E
Specifies the IP address for the remote SNMP device. IP addresses should
be expressed in dotted decimal notation (for example, 10.10.10.1).
Specifies the engine ID for the remote SNMP device.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
snmp-server user
1326