ADTRAN AOS Version R10.1.0 Command Reference Manual page 1327

Command Reference Guide
snmp-server group
Use the snmp-server group command to specify a new Simple Network Management Protocol (SNMP)
group to control access to SNMP information. Use the no form of this command to remove a specified
group. Variations of this command include:
snmp-server group <groupname> v1 [ip access-class <ipv4 acl> | ipv6 access-class <ipv6 acl> |
notify <name> | read <name> | write <name>]
snmp-server group <groupname> v2c [ip access-class <ipv4 acl> | ipv6 access-class <ipv6 acl> |
notify <name> | read <name> | write <name>]
snmp-server group <groupname> v3 auth [ip access-class <ipv4 acl> | ipv6 access-class <ipv6 acl> |
notify <name> | read <name> | write <name>]
snmp-server group <groupname> v3 noauth [ip access-class <ipv4 acl> | ipv6 access-class
<ipv6 acl> | notify <name> | read <name> | write <name>]
snmp-server group <groupname> v3 priv [ip access-class <ipv4 acl> | ipv6 access-class <ipv6 acl> |
notify <name> | read <name> | write <name>]
Syntax Description
<groupname>
v1
v2c
v3
auth
noauth
priv
ip access-class <ipv4 acl>
ipv6 access-class <ipv6 acl>
notify <name>
read <name>
write <name>
Default Values
If no views are specified, the system automatically assigns default read- and notify-views that have no
restrictions.
Command History
Release 13.1
Release 18.2
60000CRG0-35E
Specifies the name of the SNMP group (32 characters maximum).
Uses SNMP version 1 security model.
Uses SNMP version 2c security model.
Uses SNMP version 3 user-based security model (USM).
In version 3, indicates that authentication is used.
In version 3, indicates that no authentication is used.
In version 3, indicates that privacy authentication is used.
Specifies an Internet Protocol version 4 (IPv4) access control list (ACL)
entry.
Specifies an Internet Protocol version 6 (IPv6) ACL entry.
Specifies a notify-view entry (32 characters maximum).
Specifies a read-view entry (32 characters maximum).
Specifies a write-view entry (32 characters maximum).
Command was introduced.
Command syntax was changed to include the ip access-class and
ipv6 access-class parameters for IPv6 support in ADTRAN
internetworking products only.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1327