ADTRAN AOS Version R10.1.0 Command Reference Manual page 1342

Command Reference Guide
sntp wait-time <value>
Use the sntp wait-time command to set the time between updates from the time server. Use the no form of
this command to return to the default setting.
Syntax Description
<value>
Default Values
By default, the wait time is set to 86400 seconds (1 day).
Command History
Release 8.1
Usage Examples
The following example sets the Simple Network Time Protocol (SNTP) wait time to two days:
(config)#sntp wait-time 172800
60000CRG0-35E
Specifies time (in seconds) between updates. Range is 10 to 4294967294
seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1342