Snmp Agent - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

snmp agent

Use the snmp agent command to enable the Simple Network Management Protocol (SNMP) agent. Use
the no form of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, the SNMP agent is disabled.
Command History
Release 1.1
Release 18.2
Release R10.1.0
Functional Notes
Allows a MIB browser to access standard MIBs within the product. This also allows the product to send
traps to a trap management station.
SNMP can be used with either Internet Protocol version 4 (IPv4) or IPv6.
Usage Examples
The following example enables the IP SNMP agent:
(config)#snmp agent
60000CRG0-35E
Command was introduced.
Command was changed from ip snmp agent to snmp agent to incorporate
Internet Protocol version 6 (IPv6) for ADTRAN internetworking products
only.
Command syntax was changed to remove the ip keyword in ADTRAN voice
products.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1316