Command Reference Guide
snmp-server chassis-id <string>
Use the snmp-server chassis-id command to specify an identifier for the Simple Network Management
Protocol (SNMP) server. Use the no form of this command to return to the default value.
Syntax Description
<string>
Default Values
By default, the snmp-server chassis-id is set to Chassis ID.
Command History
Release 6.1
Usage Examples
The following example configures a chassis ID of A432692:
(config)#snmp-server chassis-id A432692
60000CRG0-35E
Identifies the product using an alphanumeric string (up to 32 characters in
length).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1318