ADTRAN AOS Version R10.1.0 Command Reference Manual page 1337

Command Reference Guide
priv des <priv password>
remote <host>
ip access-class <ipv4 acl>
ipv6 access-class <ipv6 acl>
It is necessary to configure the SNMP engine ID before configuration of the remote users
for a particular agent can be completed. Refer to the command
remote <ip address> <string> on page 1326
the remote option.
Default Values
No default values are necessary for this command.
Command History
Release 13.1
Release 14.1
Release 18.2
Release R10.1.0
Usage Examples
The following example enters a new user named BobbyW and assigns the user to a group called
securityV3auth using version 3 security model and authentication method message digest 5 (MD5) with a
password of passWORD6243 and no ACL to verify:
(config)#snmp-server user BobbyW securityV3auth v3 auth md5 passWORD6243
Technology Review
SNMP server users are configured and attached to a specified group with an SNMP version. The SNMP
version defines the security model of the group, with SNMP version 1 (SNMPv1) being the least secure
and SNMP version 3 (SNMPv3) the most secure. Groups also define the read, write, notify, and view
access for each user that resides in the group.
60000CRG0-35E
Uses the CBC-DES privacy authentication algorithm and a password
string used for data encryption between the host and agent.
Optional. Identifies the host name or IP address of a remote SNMP
entity to which the user belongs. The remote host is necessary for
acknowledgement of SNMP version 3 notifications.
Optional. Specifies an Internet Protocol version 4 (IPv4) access control
list (ACL) entry.
Optional. Specifies an Internet Protocol version 6 (IPv6) ACL entry.
Command was introduced.
Command was expanded to include the remote <host> parameter.
Command syntax was changed to include the ip access-class and
ipv6 access-class parameters for IPv6 support in ADTRAN
internetworking products only.
Command syntax was changed to include the ip access-class and
ipv6 access-class parameters for IPv6 support in ADTRAN voice
products.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
snmp-server engineID
for instructions in setting the engine ID with
1337