ADTRAN AOS Version R10.1.0 Command Reference Manual page 1350

Command Reference Guide
spanning-tree pathcost method
Use the spanning-tree pathcost method command to select a short or long pathcost method used by the
spanning-tree protocol. Use the no form of this command to return to the default setting. Variations of this
command include:
spanning-tree pathcost method long
spanning-tree pathcost method short
Syntax Description
long
short
Default Values
By default, spanning-tree pathcost is set to short.
Command History
Release 5.1
Usage Examples
The following example specifies that the spanning-tree protocol use a long pathcost method:
(config)#spanning-tree pathcost method long
60000CRG0-35E
Specifies a long pathcost method.
Specifies a short pathcost method.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1350