ADTRAN AOS Version R10.1.0 Command Reference Manual page 1340

Command Reference Guide
sntp retry-timeout <value>
Use the sntp retry-timeout command to set the amount of time to wait for a response before allowing a
new request. Use the no form of this command to return to the default setting.
Syntax Description
<value>
Default Values
By default, the retry timeout is set to 5 seconds.
Command History
Release 8.1
Usage Examples
The following example sets the Simple Network Time Protocol (SNTP) retry timeout to 10 seconds:
(config)#sntp retry-timeout 10
60000CRG0-35E
Specifies time (in seconds) to wait for a response before retrying. The range
is from 3 to 4294967294 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1340