ADTRAN AOS Version R10.1.0 Command Reference Manual page 1330

Command Reference Guide
version 1
version 2c
version 3
auth
noauth
priv
<community>
bgp
frame-relay
snmp
track
voice
Default Values
No default values are necessary for this command.
Command History
Release 1.1
Release 13.1
Release 17.6
Release 17.9
Release 18.1
Usage Examples
The following example sends all SNMP traps to the host at address 190.3.44.69 and community string
MyCommunity using SNMP version 2c:
(config)#snmp-server host 190.3.44.69 traps version 2c MyCommunity snmp
60000CRG0-35E
Uses SNMP version 1 security model.
Uses SNMP version 2c security model.
Uses SNMP version 3 user-based security model (USM).
In version 3, indicates that authentication is used.
In version 3, indicates that no authentication is used.
In version 3, indicates that privacy authentication is used.
Specifies the community string (used as a password) (16 characters
maximum) for authorized agents to obtain access to SNMP information.
Optional. Enables Border Gateway Protocol (BGP) traps only.
Optional. Enables Frame Relay traps only.
Optional. Enables SNMP traps only.
Optional. Enables the network monitor track traps.
Optional. Enables voice traps only.
Command was introduced.
Command was expanded to include the informs options.
Command was expanded to include the frame-relay parameter.
Command was expanded to include more frame-relay options, more snmp
options, and the voice parameter. In addition, the snmp-server host <ip
address> traps version 3 priv <community> version of the command was
removed.
Command was expanded to include the bgp and track parameter.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1330