Table of Contents
Advertisement
Command Reference Guide
snmp-server community
Use the snmp-server community command to specify a community string to control access to the Simple
Network Management Protocol (SNMP) information. Use the no form of this command to remove a
specified community. Variations of this command include:
snmp-server community <community>
snmp-server community <community> [ip access-class <ipv4 acl> | ipv6 access-class <ipv6 acl>]
snmp-server community <community> ro
snmp-server community <community> ro [ip access-class <ipv4 acl> | ipv6 access-class <ipv6 acl>]
snmp-server community <community> rw
snmp-server community <community> rw [ip access-class <ipv4 acl> | ipv6 access-class <ipv6 acl>]
snmp-server community <community> view <name>
snmp-server community <community> view <name> [ip access-class <ipv4 acl> | ipv6 access-class
<ipv6 acl>]
snmp-server community <community> view <name> ro
snmp-server community <community> view <name> ro [ip access-class <ipv4 acl> | ipv6
access-class <ipv6 acl>]
snmp-server community <community> view <name> rw
snmp-server community <community> view <name> rw [ip access-class <ipv4 acl> | ipv6
access-class <ipv6 acl>]
Syntax Description
<community>
ip access-class <ipv4 acl>
ipv6 access-class <ipv6 acl>
ro
rw
view <name>
Default Values
By default, there are no configured SNMP communities.
60000CRG0-35E
Specifies the community string (a password to grant SNMP access).
Optional. Specifies an Internet Protocol version 4 (IPv4) access control
list (ACL) name used to limit access. Refer to
<ipv4 acl name> on page 982
name> on page 984
for more information on creating ACLs
Optional. Specifies an Internet Protocol version 6 (IPv6) ACL name
used to limit access. Refer to
name> on page 1181
and
page 1183
for more information on creating ACLs.
Optional. Grants read-only access, allowing retrieval of MIB objects.
Optional. Grants read-write access, allowing retrieval and modification
of MIB objects.
Optional. Specifies a previously defined view. Views defined objects
available to the community. For information on creating a new view,
refer to
snmp-server view <name> <value> on page
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
ip access-list extended
and
ip access-list standard <ipv4 acl
ipv6 access-list extended <ipv6 acl
ipv6 access-list standard <ipv6 acl name> on
1339.
1319
Advertisement
Table of Contents
