ADTRAN AOS Version R10.1.0 Command Reference Manual page 1355

Command Reference Guide
statistics rate-interval <value>
Use the statistics rate-interval command to specify the interval (in seconds) to receive interface statistics.
Use the no form of this command to return to the default interval.
Syntax Description
<value>
Default Values
By default, the wait interval is set at 300 seconds.
Command History
Release 17.4
Usage Examples
The following example configures a wait interval of 90 seconds:
(config)#statistics rate-interval 90
60000CRG0-35E
Specifies the wait interval. Range is 30 to 600 seconds (in 30 second
increments).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1355