Command Reference Guide
Command History
Release 5.1
Release 7.1
Functional Notes
It is recommended that you use a user name that is a unique name for your network and one that only the
network administrators know. If the default user name is used, it is possible for unauthorized users to gain
access to the network.
By default, there is a 0 minute wait time before attempting to reconnect to a timed out server. Leaving the
wait time at 0 minutes means that the server will never be declared dead. The time period value is 0 to
1440 minutes, although you should enter a value of at least 1 minute or greater.
Usage Examples
The following example shows a typical configuration of these parameters:
(config)#radius-server deadtime 10
(config)#radius-server enable-username fantastico
(config)#radius-server key mysecretkey
(config)#radius-server retry 4
(config)#radius-server timeout 2
60000CRG0-35E
Command was introduced.
Added the enable-username selection.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1301