ADTRAN AOS Version R10.1.0 Command Reference Manual page 1332

Command Reference Guide
snmp-server location "<string>"
Use the snmp-server location command to specify the Simple Network Management Protocol (SNMP)
system location string. Use the no form of this command to return to the default value.
Syntax Description
"<string>"
Default Values
By default, the snmp-server location is set to ADTRAN.
Command History
Release 1.1
Usage Examples
The following example specifies a location of 5th Floor Network Room:
(config)#snmp-server location "5th Floor Network Room"
60000CRG0-35E
Populates the system location string using an alphanumeric string enclosed
in quotation marks (up to 32 characters in length).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1332