ADTRAN AOS Version R10.1.0 Command Reference Manual page 48

Command Reference Guide
The following is a list of output messages from the ping ipv6 command:
!
-
$
x
?
*
e
B
VRF on AOS products allows a single physical router to be partitioned into multiple virtual routers. Each
router instance has its own route table and interface assignments. Beginning with Release 16.1, all AOS
routers supporting multiple VRF instances (multi-VRF) have an unnamed default VRF instance regardless
of whether multi-VRF is configured. Therefore, executing the abovementioned commands without
specifying a VRF will only affect the default unnamed VRF.
Usage Examples
The following is example pings 2001:DB8:1A0::3 with 200 byte ICMPv6 ECHO_REQ packets:
>ping ipv6 2001:DB8:1A0::3 size 200
Type CTRL+C to abort.
Legend: '!' = Success, '?' = Unknown host, '$' = Invalid host address
'*' = Request timed out, '-' = Destination host unreachable
'x' = TTL expired in transit, 'e' = Unknown error
'B' = Packet too big
Sending 5, 200-byte ICMP Echos to 2001:DB8:1A0::3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/2 ms
60000CRG0-35E
Success
Destination Host Unreachable
Invalid Host Address
TTL Expired in Transit
Unknown Host
Request Timed out
Unknown Error
Packet too Big
Copyright © 2012 ADTRAN, Inc.
Basic Mode Command Set
48