ADTRAN AOS Version R10.1.0 Command Reference Manual page 39

Command Reference Guide
ping
Use the ping command (at the Enable mode prompt) to verify IPv4 network connectivity. For information
on how to verify IPv6 network connectivity, refer to
include:
ping
ping [ip] <ipv4 address | hostname>
ping [ip] <ipv4 address | hostname> <interface>
ping [ip] <ipv4 address | hostname> data <string>
ping [ip] <ipv4 address | hostname> repeat <number>
ping [ip] <ipv4 address | hostname> size <value>
ping [ip] <ipv4 address | hostname> source <ipv4 address>
ping [ip] <ipv4 address | hostname> timeout <value>
ping [ip] <ipv4 address | hostname> verbose
ping [ip] <ipv4 address | hostname> wait <interval>
ping [ip] vrf <name> <ipv4 address | hostname>
ping [ip] vrf <name> <ipv4 address | hostname> <interface>
ping [ip] vrf <name> <ipv4 address | hostname> data <string>
ping [ip] vrf <name> <ipv4 address | hostname> repeat <number>
ping [ip] vrf <name> <ipv4 address | hostname> size <value>
ping [ip] vrf <name> <ipv4 address | hostname> source <ipv4 address>
ping [ip] vrf <name> <ipv4 address | hostname> timeout <value>
ping [ip] vrf <name> <ipv4 address | hostname> verbose
ping [ip] vrf <name> <ipv4 address | hostname> wait <interval>
After specifying the target IPv4 address to ping, the other parameters can be entered in
any order. Use the ? after each specified subcommand for a valid list of arguments and
settings.
Syntax Description
ip
<interface>
<ipv4 address | hostname>
data <string>
60000CRG0-35E
ping ipv6 on page
Optional. Specifies an IPv4 ping.
Optional. Specifies the egress interface when pinging an IPv4 address.
Interfaces are specified in the <interface type> <slot/port | interface id>
format. For example, for an Ethernet interface, use eth 0/1. Type ping
<ipv4 address | hostname> ? to display a list of valid interfaces.
Optional. Specifies the IPv4 address or host name of the system to ping.
IPv4 addresses should be expressed in dotted decimal notation (for
example, 10.10.10.1). Entering the ping command with no specified
Internet Protocol version 4 (IPv4) address prompts the user with parameters
for a more detailed ping configuration. Refer to Functional Notes (below) for
more information.
Optional. Specifies an alphanumerical string to use (the ASCII equivalent)
as the data pattern in the ECHO_REQ packets.
Copyright © 2012 ADTRAN, Inc.
Basic Mode Command Set
46. Variations of this command
39