ADTRAN AOS Version R10.1.0 Command Reference Manual page 1405

Command Reference Guide
voice flashhook mode
Use the voice flashhook mode command to determine if flashhook events will be interpreted locally or
will be forwarded to the far end. Use the no form of this command to return to the default setting.
Variations of this command include:
voice flashhook mode interpreted
voice flashhook mode transparent
Syntax Description
interpreted
transparent
Default Values
By default, the voice flashhook mode is set to interpreted.
Command History
Release 9.3
Usage Examples
The following example sets the flashhook mode to allow the local unit to interpret flashhook events:
(config)#voice flashhook mode interpreted
60000CRG0-35E
Allows the local unit to interpret flashhook events.
Specifies flashhook events to be transparent to the provider.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1405