Command Reference Guide
voice mail leave
Use the voice mail leave command to configure user parameters for the voicemail leave extension. Use the
no form of this command to disable the setting. Variations of this command include the following:
voice mail leave alias <name>
voice mail leave sip-identity <station> <Txx>
voice mail leave sip-identity <station> <Txx> register
voice mail leave sip-identity <station> <Txx> register auth-name <username> password <password>
Syntax Description
alias <name>
sip-identity <station> <Txx>
register
auth-name <username>
password <password>
Default Values
No default values are necessary for this command.
Command History
Release 13.1
Usage Examples
The following example configures the voice mail leave sip-identity to use extension 8000 as its identity
on trunk T06:
(config)#voice mail leave sip-identity 8000 T06
60000CRG0-35E
Specifies an alias name to use as an alternate when accessing the
check extension.
Specifies the station to be used for Session Initiation Protocol (SIP)
trunk (e.g., station extension). Also, specifies the SIP trunk through
which to register the server. The trunk is specified in the format Txx
(e.g., T01).
Registers the user to the server.
Sets the user name that will be required as authentication for
registration to the SIP server.
Sets the password that will be required as authentication for
registration to the SIP server.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1416