Table of Contents
Advertisement
Command Reference Guide
Global Configuration Mode Command Set
voice operator-group
Use the voice operator-group command to access the Voice Operator Group command mode. Refer to
Voice Operator Ring Group Command Set on page 3384
for more information. Use the no form of this
command to disable the setting.
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release 12.1
Command was introduced.
Usage Examples
The following example enters the Operator Group configuration mode:
(config)#voice operator-group
Configuring Operator Group.
(config-operator-group)#
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
1424
Advertisement
Table of Contents
