ADTRAN AOS Version R10.1.0 Command Reference Manual page 1384

Command Reference Guide
voice cause-code-map
Use the voice cause-code-map command to configure the cause code and Session Initiation Protocol (SIP)
message numbers for the primary rate interface (PRI). Cause codes and SIP message numbers are
associated with a particular connection failure, and notifies the system when problems occur. Use the no
form of this command to return to the default setting. Variations of this command include:
voice cause-code-map from-pri <value> <value>
voice cause-code-map to-pri <value> <value>
Syntax Description
from-pri <value> <value>
to-pri <value> <value>
Default Values
No default values are necessary for this command.
Command History
Release 13.1
Usage Examples
The following example sets the cause code number to 28 to associate with SIP messages:
(config)#voice cause-code-map from-pri 28
60000CRG0-35E
Enter the cause code number to map to the SIP message. The valid range
is 1 to 127. Next, enter the SIP message number to be used. The valid
range is 400 to 606.
Enter the SIP message number to map to the PRI cause code map. The
valid range is 400 to 606. The second <value> is the PRI cause code
number. The valid range is 1 to 127.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1384