ADTRAN AOS Version R10.1.0 Command Reference Manual page 1368

Command Reference Guide
tftp ipv6 access-class <ipv6 acl> in
Use the tftp ip access-class class command to apply an Internet Protocol version 6 (IPv6) access control
list (ACL) to all self-bound IPv4 Trivial File Transfer Protocol (TFTP) incoming connections. Use the no
form of this command to remove the ACL.
Syntax Description
<ipv6 acl>
in
Default Values
By default, no ACLs are configured or applied to TFTP connections.
Command History
Release 18.2
Usage Examples
The following example applies the previously configured IPv6 ACL MatchAll to inbound TFTP
connections:
(config)#tftp ipv6 access-class MatchAll in
60000CRG0-35E
Specifies the IPv6 ACL to apply to the TFTP connections.
Specifies that the ACL is applied to incoming TFTP connections.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1368